Lash Tint for Lamination & Lifting «KeraTint»

Lash Tint for Lamination & Lifting «KeraTint» is a specialized lash tint developed to work in synergy with lash lifting treatments or as an independent tinting product.

As part of the KeraVEG System, KeraTint allows lash artists to combine lifting and coloring in one procedure, optimizing treatment time while delivering vibrant, even results.

The tint can be applied during the second stage of lash lifting when mixed with KeraBoost Step 2, or used separately for classic lash tinting without lifting.

The formula provides fast color development and long-lasting results while supporting lash condition throughout the process.

Key benefits:

• Lash tint suitable for lamination and lifting procedures
• Can be used during Step 2 of lash lift or as standalone tint
• Delivers rich, vibrant lash color
• Helps combine lifting and tinting in one service
• Enriched with vegan protein and sunflower seed extract
• Supports lash softness and shine
  
  

Shelf life: 24 months
Period after opening (PAO): 2 months

NOTE! Can be used for independent lash tinting (without lifting) by mixing with Oxidizing Emulsion 3.5%.

LASH LIFTING PROCEDURE STAGES

1) Client's lash condition diagnosis

Determine the exposure time and type of product, KeraSoft — either KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft ash Lifting Serum Step 1, according to the following criteria:

1st group: thick and straight lash hairs, not previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Lash Lifting Serum Step 1, exposure time: 8-10 minutes;

2nd group: medium or thin lash hairs, not previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Lash Lifting Serum Step 1, exposure time: 5-7 minutes;

3rd group: medium thickness lash hairs, previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Lash and Brow Lifting Serum Step 1, exposure time: 8-10 minutes;

4th group: thin lash hairs, previously treated with chemical compounds (lifting, tinting, bleaching) — KeraSoft Lash and Brow Lifting Serum Step 1, exposure time: 5-7 minutes.

NOTE! The maximum exposure time for KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1 is 10 minutes.

NOTE! The room temperature directly affects the activity of both products — the higher the temperature, the faster the reaction rate.

The exposure time for KeraBoost Lash and Brow Fixing Serum Step 2 is 7 minutes and is not dependent on the client's lash hairs condition. The exposure time for KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1 remains the same.

2) Preparation for lash lifting procedure

2.1 Use ÉLAN DETOX-MOUSSE to cleanse the lashes before the lifting procedure. Remove the foam with a cotton pad moistened with water.

2.2 Secure a silicone pad of the appropriate size on the upper eyelid.

2.3 Distribute and secure the lashes on the pad using ÉLAN professional line lash lamination fixing gel and an applicator.

3) Lash curl formation — KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1

3.1 Apply KeraSoft Step 1 to the area where the lash curl is to be formed. Exposure time: 5-10 minutes.

NOTE! The exposure time and type of product (KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1) must correspond to those indicated for the chosen group of lashes.

3.2 After the exposure time, remove the residue of the product first with a dry brush in the direction of lash hair growth, and then with a microbrush or cotton swab moistened with water.

4) Fixation of lash hairs direction — KeraBoost Lash and Brow Fixing Serum Step 2

4.1 Fixation of lash hairs direction without tinting

4.1.1 Apply KeraBoost Lash and Brow Fixing Serum Step 2 to the entire lash area with a thick layer. Exposure time: 7 minutes.

4.1.2 After the exposure time, remove the residue of the product first with a dry brush in the direction of lash hair growth, and then with a microbrush or cotton swab moistened with water or ÉLAN DETOX-MOUSSE. If foam is used, remove the foam with a cotton pad moistened with water.

4.2 Fixation of lash hair direction with tinting on a pad — KeraBoost Lash and Brow Fixing Serum Step 2 + KeraTint Lash Tint

4.2.1 Mix KeraTint Lash Tint and KeraBoost Lash and Brow Fixing Serum Step 2 in a non-metallic container at a ratio of 1:2.

NOTE! The colour of the tint in the bottle may vary from light brown to black as a result of contact with air after opening the package. This is normal for the dyes used and does not affect the result of lash tinting.

4.2.2 Apply the mixture to the entire lash area with a thick layer. Exposure time: 7 minutes.

4.2.3 After the exposure time, remove the residue of the mixture first with a dry brush in the direction of lash growth, and then with a microbrush or cotton swab moistened with water or ÉLAN DETOX-MOUSSE. If foam is used, remove the foam with a cotton pad moistened with water.

4.2.4 To fix the result obtained after tinting, apply ÉLAN COLOUR FIX colour fixing fluid to the lashes.

5) Lash care — KeraCare Lash and Brow Caring Serum Step 3

5.1 After using KeraBoost Lash and Brow Fixing Serum Step 2 or a mixture of KeraTint Lash Tint + Lash and Brow Fixing Serum Step 2, apply a small amount of KeraCare Lash and Brow Care Serum Step 3 to cleanse lashes and evenly distribute. Leave on until completely absorbed. The product does not require rinsing.

RECOMMENDATIONS AFTER LASH LIFTING AND BROW LAMINATION

! It is not recommended to tint eyebrows with henna or undergo eyebrow bleaching procedures, as the result can be extremely unpredictable: the hair structure may be disrupted (dry, dull hairs), which can lead to breakage and hairs loss.

! For 24 hours after the procedure, avoid visiting the sauna, steam room, or tanning bed, do not allow mechanical disruption of the eyebrow shape or lash curl (sleeping face down on a pillow), and do not comb eyebrows and lashes.

! For 48 hours after the procedure, avoid using aggressive cosmetic products and procedures on eyebrows and lashes (scrubs, peels, alcohol-containing lotions, laser procedures).

RESTRICTIONS ON LASH LIFTING AND BROW LAMINATION PROCEDURES

Absolute restrictions include individual sensitivity to the components in the products used, any skin damage in the eyebrow and eye area, redness, eruptions of any origin, allergic reactions, as well as tanning bed usage, and laser procedures within 24 hours before lash lifting and/or eyebrow lamination.

PRECAUTIONS

KeraSoft contains thioglycolates and ammonia, KeraBoost contains hydrogen peroxide, and KeraTint contains phenylenediamines, toluene-2,5-diamines, and resorcinol. These products may cause an allergic reaction. Before use, it is necessary to perform an allergy test: apply 2 drops of each product to a small area of skin on the inner elbow 48 hours before use. If no redness, swelling, or irritation occurs, you may proceed with the procedure.

For professional use only. Read and follow the application instructions. Use protective gloves. For external use only. Do not use metal objects while working with the products. Avoid contact with eyes. If the product comes into contact with the eyes, rinse immediately with water. In case of an allergic reaction, consult a dermatologist.

KeraTint is not intended for use by persons under 16 years of age. Temporary black henna tattoos may increase the risk of allergy. Do not use the tint if you have:

— a rash on the face or sensitive, irritated, or damaged scalp skin;

— experienced any reaction after hair or lash tinting;

— had a reaction to a temporary black henna tattoo in the past.

WATER, CETEARYL ALCOHOL, TRIDECETH-2 CARBOXAMIDE MEA, DIMETHYLAMINO METHYLPROPANOL, PROPYLENE GLYCOL, GLYCERIN, GLYCERYL STEARATE, CETEARETH-20, P-PHENYLENEDIAMINE, TOLUENE-2,5-DIAMINE SULFATE, RESORCINOL, PEG-100 STEARATE, 2,4-DIAMINOPHENOXYETHANOL HCL, M-AMINOPHENOL, DISODIUM EDTA, SODIUM ERYTHORBATE, UREA, COCAMIDOPROPYLAMINE OXIDE, MICROCRYSTALLINE CELLULOSE, XANTHAN GUM, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, BUTYLENE GLYCOL, HELIANTHUS ANNUUS (SUNFLOWER) SEED EXTRACT, HYDROLYZED VEGETABLE PROTEIN, BENZYL ALCOHOL, DEHYDROACETIC ACID, MICA, FRAGRANCE, GERANIOL, HEXYL CINNAMAL, LINALOOL, CITRONELLOL, COUMARIN, LIMONENE, EUGENOL, CINNAMAL, ISOEUGENOL, BENZYL BENZOATE, CITRAL, METHYL 2-OCTYNOATE, BENZYL SALICYLATE, BENZYL ALCOHOL, CINNAMYL ALCOHOL, IRON OXIDES.